A product designer in Ahmedabad needs a handheld-device mock-up with a white body, black buttons and a green status ring. Printing it as one piece in three colours would save a day of masking and painting, and in 2026 that is a realistic request. Multicolour 3D printing went from a premium feature to a standard talking point this year, with toolchangers, multi-nozzle heads and multi-spool systems launched or shown from CES in January to TCT Asia in March and Formnext Asia Shenzhen in August. This post sorts the approaches, says where each machine was shown or announced, explains the purge-waste trade-off, and covers what it means for colour prototypes, product mock-ups and scale models. Layer X did not attend these events; we are reading public reports. For prototype work today, see our product prototyping service. For the full show round-up, see our TCT Shenzhen 2026 highlights.
Three ways to get several colours into one print
Not every multicolour machine works the same way, and the difference decides how much filament you throw away.
- Multi-spool, single nozzle. A filament changer feeds several spools into one nozzle. It is the simplest design, but every colour change flushes the old colour out of the nozzle first.
- Multi-nozzle. Each filament gets its own nozzle, or a pair of nozzles swap on one head. Little or no flushing is needed, at the cost of a more complex head.
- Toolchanger or multi-extruder. Several independent extruders or toolheads each carry a colour. Flashforge's Creator 5 series, for example, uses four independent extruders.
What was shown, and where
Several of the best-known 2026 launches did not happen at a Chinese show at all, so the venue matters when you read headlines. The table lists what we could trace to a source.
| Machine | Approach | Where shown or announced |
|---|---|---|
| Bambu Lab X2D | Two nozzles switching mechanically on one head; heated chamber mode | Announced 14 April 2026, not at a show |
| Snapmaker U1 | Four-material machine; Snapmaker Space model marketplace | Marketplace in closed beta at Formnext Asia Shenzhen, August |
| Flashforge Creator 5 and Creator 5 Pro | Four independent extruders; the Pro is fully enclosed | TCT Asia, Shanghai, March |
| AtomForm Palette 300 | One dedicated nozzle per filament, 12 nozzles in all | Unveiled at CES, Las Vegas, January; shown at TCT Asia |
| Elegoo CANVAS (Centauri Carbon 2 Combo) | Four-colour multi-spool system | Announced January 2026; we found no show launch |
| Anycubic Kobra X | Built-in four-colour system | Shown at RAPID+TCT in Boston in April 2026, not in China |
Flashforge also showed the CJ270 at TCT Asia, a desktop full-colour jetting printer with water-soluble supports, aimed at product design and figurines. Performance claims for these machines come from the companies and were not independently tested.
The purge-waste trade-off
Bambu Lab says its two-nozzle approach avoids the long purge sequences of many multi-material systems when printing multicolour in PLA or PETG, and AtomForm says its nozzle-per-filament design avoids frequent purging and reloading. Those are manufacturer claims. The underlying physics is simple: a single nozzle must be cleared before a new colour prints cleanly, and that cleared plastic is waste.
You can cut waste on any machine with design choices:
- Group colour into a few large blocks instead of small islands on every layer.
- Use two or three colours in a prototype, not the full palette.
- Print small accents such as buttons or logos as separate parts and assemble them.
- Tune flush volumes in the slicer so the machine purges only what a clean colour needs.
Count colour changes, not colours. A part with many small colour islands on each layer wastes far more filament than the same number of colours in a few tall blocks. (Layer X rule of thumb)
What it means for colour prototypes and product mock-ups
Colour is most useful where it carries information. Buttons and legends on a device mock-up, colour-coded parts in a training assembly, or a packaging prototype that needs a visible brand colour can all be printed in one go, so painting and masking drop out of the schedule.
There are limits. Filament colours are fixed, so an exact brand match usually still needs painting. Seams between materials are weaker than a single-material wall. Machines that print only in PLA and PETG will not give a heat-resistant part; the X2D's heated chamber mode, which Bambu Lab says suits ABS, ASA and nylon, is aimed at that gap.
If you want a service rather than a machine, FDM 3D printing at our studio covers PLA, PETG, ABS, ASA and Nylon PA12. Ask about finishing and colour options when you request a quote; we have not announced multicolour printing as a service.
What it means for scale models
Architectural and industrial scale models are normally built from separate parts: massing, fine detail, bases and covers. Colour comes from part separation and finishing, not from one multicolour print. Multicolour machines are most interesting for small accessories such as people, cars and signage, where colour islands are tiny and the part count is high. Our scale model service uses printed, resin and laser-cut parts, and finishing is quoted per brief.
For a deeper look at multiple materials in one part, read our guide to multi-material 3D printing and overmoulding.
What multicolour does not fix
Colour does not add strength, heat resistance or accuracy. It also adds failure points: more moving parts in the head, more filament paths, more tuning. Enclosed machines for ABS and ASA need good ventilation. Treat multicolour as a presentation tool first and a functional one second.
Key Takeaways
- Three approaches: multi-spool single nozzle, multi-nozzle, and toolchanger or multi-extruder designs differ mainly in purge waste.
- Check the venue: the X2D was announced outside a show, and the Kobra X was shown in Boston, not China.
- Waste is a design choice: fewer colour changes and separate accent parts save filament on any machine.
- Good for mock-ups: colour-coded buttons, legends and training parts print in one go, but exact brand colours still need finishing.
- Claims are the makers' own: waste and speed figures were not independently tested.
Frequently Asked Questions
What is a toolchanger 3D printer?
It carries several nozzles, extruders or toolheads and swaps between them during a print, instead of pushing every colour through one nozzle. This reduces the plastic flushed at each colour change. Designs differ by brand, so check how each machine does it.
Which 2026 multicolour printers were shown at TCT Asia?
Flashforge showed the Creator 5 series and the CJ270, and AtomForm showed the Palette 300 after its CES unveiling. The Bambu Lab X2D was announced separately in April, and Anycubic showed the Kobra X in Boston.
Is multicolour 3D printing good for functional parts?
Mostly no. It is strongest for looks, labelling and colour coding. For load-bearing parts, material choice, orientation and wall design matter more than colour.
Can Layer X print multicolour mock-ups?
Our FDM printing is quoted per job in PLA, PETG, ABS, ASA and Nylon PA12. Send your brief and ask about finishing and colour; our engineers will tell you what is practical.
Why Layer X for colour prototypes?
Layer X did not attend the shows covered here and does not use these machines, so this is industry reading. What we offer is a studio in Satellite, Ahmedabad, with FDM, SLA resin and SLS nylon printing, plus laser-cut acrylic bases and covers, shipped across Gujarat and India. Our engineers review every file and quote within 24 hours, with no minimum order. If a mock-up needs several colours, we will say honestly whether printing, painting or a mix gets you there fastest. WhatsApp +91 93283 10466 works too. Get your 24-hour quote
Sources & Further Reading
- Fabbaloo: Bambu Lab launches X2D with dual nozzles and heated chamber
- Flashforge at TCT Asia 2026: Creator 5, Creator 5 Pro and CJ270
- 3D Printing Industry: AtomForm unveils 12-nozzle Palette 300 at CES 2026
- VoxelMatters: Snapmaker Space enters closed beta at Formnext Asia
- Anycubic at RAPID+TCT 2026 (press release via ANP Persportaal)